| Customization: | Available |
|---|---|
| After-sales Service: | We Will Supply After Sale Services at Any Time |
| Warranty: | 12 Months |
|
Still deciding? Get samples of US$ 1300/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hand Held Plastic Extrusion Welding Machine/Extrusion Welder/ Hand Held Plastic Extruder
Model: SDJ3400
Please read operating instructions carefully before use and keep it for further reference.
Operation procedures>>>>>>>>>>>>>>>
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
2) Open the control box switch, welding temperature is generally set at 300 ° C, Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.
3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods.
4)The air temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °
5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.
6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
Product Overview>>>>>>>>>>>>>>>
SDJ3400 Series Extruding plastic gun is a new type of hot air welder which imported foreign advanced technology.
Reasonable structure, convenient operation, continuous welding, high working efficiency, powerful extrusion, to make the weld strength is greatly improved,It is the idealproduct for a variety of thermoplastic welding processing.
Available welding materials: thermoplastic HDPE, PP, PVDF, especially PE .Don't apply in a conductive plastic(PEEL), or cause the machine to produce a conductive short-circuit.
Main technical parameters>>>>>
| Model | SDJ3400 |
| Voltage | 220V |
| Frequency | 50/60Hz |
| Metabo Extruding Power | 1300W |
| Hot Air Power | 3400W |
| Welding Rod Heating Power | 800W |
| Air Temp | 20-600ºC Adjustable |
| Extruding Temp | 20-300ºC Adjustable |
| Weilding Speed | 2.0-2.5Kg/h |
| Weilding Rod Diameter | 3.0-4.0mm |
| Weight | 12KG |
| Application | PP PE |
More pictures>>>>>>>>>>>>>>>
Packing>>>>>>>>>>>>>>
Exhibition>>>>>>>>>>>>>>
More Products>>>>>>>>>>>>>>
){kind=link}