610A Plastic Welding Hand Extruder/Plastic Sheet Extruder with Light Weight

• Customization: Available
• Certification: CE
• Maximum Welding Thickness: 5.0mm
• Model NO.: 610A
• Combustible Gas: -
• Flame Number: -
• Size: 610A
• Type: Hand Extruder
• Voltage: 220V
• Frequency: 50/60Hz
• Metabo Extruding Power: 1300W
• Hot Air Power: 1600W
• Welding Rod Heating Power: 800W
• Air Temp: 20-620ºC Adjustable
• Extruding Temp: 50-380ºC Adjustable
• Welding Speed: 2-3kg/H
• Welding Rod Diameter: 3-5mm
• Weight: 15kg
• Cretificate: CE ISO
• Transport Package: Aluminum Box
• Specification: CE
• Trademark: SUDA
• Origin: China Mainland
• HS Code: 851529000
• Production Capacity: 2000sets/Year

Product Description

Model: Booster EX2
Please read operating instructions carefully before use and keep it for further reference.

Operation procedures
 
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
 
2) Open the control box switch, welding temperature is generally set at 300 ° C,  Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.

3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods. 

4)The air temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °

5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.

6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
 
Product Overview
 
EX3 Series Extruding plastic gun is a new type of hot air welder which imported foreign advanced technology. 
Reasonable structure, convenient operation, continuous welding, high working efficiency, powerful extrusion, to make the weld strength is greatly improved,It is the idealproduct for a variety of thermoplastic welding processing.
Available welding materials: thermoplastic HDPE, PP, PVDF, especially PE .Don't apply in a conductive plastic(PEEL), or cause the machine to produce a conductive short-circuit.

Main technical parameters
 

Model	610a
Voltage	220V
Frequency	50/60Hz
Metabo Extruding Power	1300W
Hot Air Power	1600W
Welding Rod Heating Power	800W
Welding Speed	2-3Kg/h
Welding Rod Diameter	3.0-5.0mm
Machine Weight	15kg
Warranty	12months
Certificate	CE
Dellivery	2-3workdays after payment

More Pictures
 

Product features                                                                                                                                                                                    

1.Imported hot air welding torch and imported driven system, high temperature, big torque, long service life, stable performance.

2.Light weight, easy to handle and available to peration at different angles

3.Big extrusion volume can be welded more than 10mm welding seam.

4.Different welding shoes can be applied to different types of welding.

5.It is used in the tank and pipe and comply with Part 4 of the DVS standard (Germany Welding Association).

Our Advantages 

1. Certificate:We provide CE and ISO certification and official test reports for each machine.

2. Guarrantee Period: 16-24 months free warranty,life Time Guarrantee.

3. Voltage: 220v or 380v is normal voltage, can customized 110v, 240v, 415v, 440v or according requirements.

4. Mode of transportation: Mostly by ship, less than 100kg, recommended by air or express.We can also cooperate with the shipping companies that they can help finish the custom clearance, even if you do not have import rights, you can buy.

5. Delivery time: 1~5sets: 2~3workdays; 6~10sets: 5~7workdays; Above10sets: 8~10workdays, by the way, we have stocks for many products, these products can usually be delivered within 24~48 hours. 

Other Products


Exhibition

Our Services 
Our factory can offer the samples before customers big orders,but customers need pay the samples cost and transport charges.

FAQ 
1.Why choose us?
1)Genuine products with excellent quality and competitive price.
2)Cooperating with the customer all over the world and knowing the markets very well.
3)After-Services will be highly-satisfied. Any problems and feedbacks will be answered in a short of time.
2.Why our price very stable and competitive?
1)Our factory have ourselves meltshop, most parts of the body machines from ourselves factory, save the cost.
2)We have some big customers from Southeast Asia Market and Russia Market, every mouth have the stable machines export, keep our value of exports