SDJ3400 PE PP Plastic Extruder Welding Machine/Hand Plastic Extruder with Light Weight/Plastic Hand Extruder Plastic Welding Machine/PE Hand Extruder
Operation Procedures
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
2) Open the control box switch, welding temperature is generally set at 300 ° C, Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.
3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods.
4)The air temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °
5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.
6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
Product Overview
SDJ3400 Series Extruding plastic gun is a new type of hot air welder which imported foreign advanced technology.
Reasonable structure, convenient operation, continuous welding, high working efficiency, powerful extrusion, to make the weld strength is greatly improved,It is the idealproduct for a variety of thermoplastic welding processing.
Available welding materials: thermoplastic HDPE, PP, PVDF, especially PE .Don't apply in a conductive plastic(PEEL), or cause the machine to produce a conductive short-circuit.
Specification
| Model |
SDJ3400 |
| Voltage |
220V |
| Frequency |
50/60Hz |
| Metabo Extruding Power |
1300W |
| Hot Air Power |
3400W |
| Welding Rod Heating Power |
800W |
| Air Temp |
20-600ºC Adjustable |
| Extruding Temp |
20-300ºC Adjustable |
| Weilding Speed |
2.0-2.5Kg/h |
| Weilding Rod Diameter |
3.0-4.0mm |
| Weight |
12KG |
| Application |
PP PE |
Our Advantages
1. Certificate:We provide CE and ISO certification and official test reports for each machine.
2. Guarrantee Period: 16-24 months free warranty,life Time Guarrantee.
3. Voltage: 220v or 380v is normal voltage, can customized 110v, 240v, 415v, 440v or according requirements.
4. Mode of transportation: Mostly by ship, less than 100kg, recommended by air or express.We can also cooperate with the shipping companies that they can help finish the custom clearance, even if you do not have import rights, you can buy.
5. Delivery time: 1~5sets: 2~3workdays; 6~10sets: 5~7workdays; Above10sets: 8~10workdays, by the way, we have stocks for many products, these products can usually be delivered within 24~48 hours.
6. Free Spare Parts: 1pc metal tool box, 1pc temperature sensor, 1pc screw driver, 1pc spanner, 2pcs blades, 2pcs fasten screws.
7. Electronic accessory:Electronic accessory of well-known brands will ensure the reliability of the machine. More importantly, if you need urgent repairs, you can buy these accessories faster in the local.
More Pictures
Our Services
1.Sample Services:
Our factory can offer the samples before customers big orders,but customers need pay the samples cost and transport charges.
2.Products Services:
butt fusion welding machine we produce as flows:
1) Manual HDPE butt fusion welding machine from 63mm to 250mm for HDPE pipe.
2) Hydraulic HDPE butt fusion welding machine from 63mm to 1600mm for HDPE pipe.
3) Pipe cutting saws from 0mm to 1600mm for HDPE pipe.
4) Workshop HDPE Fitting machine from 90mm to 1600mm.
Operation
Ready for shipment
Exhibition
Company Introduction
More accessories
Other Products
Audited Supplier 
){kind=link}