Sdj3400 Dual Heating HDPE Pipe Hand Extruder/Hand Extruder for Welding PP PE Sheet/Polyethylene Pipes Hand Extruder

• Customization: Available
• Application: Household Appliances, Garden Supplies, Decoration, Commodity, Auto Part, Electronic, Stationery
• Cooling Way: Air Cooling
• Model NO.: SDJ3400
• Control: Semi-Automatic
• Frequency Range: Low Frequency
• Electric Current: AC
• Style: Polyethylene Pipes Hand Extruder
• Power: Electric
• Name: Sdj3400 Hand Plastic Extruder Machine
• Model: Sdj3400
• Warranty: 12 Months
• Weight: 7kg
• Voltage: 220V
• Frequency: 50-60Hz
• Hot Air Power: 1600W
• Motor Power: 1100W
• Welding Rod Heating Power: 800kw
• Remote Technical: Yes
• Provide Free Parts: Yes
• Voice: 60dB
• Welding Speed: 2.0-2.5kg/H
• Extruding Temp: 200-300 Adjustable
• Air Temp: 20-600 Adjustable
• Transport Package: Wooden Box
• Specification: 0.002CBM
• Trademark: SUDA
• Origin: China
• HS Code: 85152900
• Production Capacity: 1000/Year

Product Description

                               
SDJ3400 Dual Heating HDPE Pipe Hand Extruder/Hand Extruder for Welding PP PE Sheet/Polyethylene Pipes Hand Extruder

Operation procedures>>>
 
1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
 
2) Open the control box switch, welding temperature is generally set at 300 ° C,  Open the hot air machine power switch,thermostat knob, heated a few minutes to operate.

3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth,and the internal sound disappears after sending welding rods. 

4)The air temperature and air volumedetermine welding 's strength.Usually hot air temperature is 260 ~ 400 °

5)Hot air motor carbon brush life is about 800 hours, attention to early replacement, do not wait until the carbon brushes to run out.

6) When shutdown, please circumgyratehot air thermostat knob to the minimum, a few minutes blowing before they shut down the hot air machine.
 
Product Overview>>>
 
SDJ3400 Series Extruding plastic gun is a new type of hot air welder which imported foreign advanced technology. 
Reasonable structure, convenient operation, continuous welding, high working efficiency, powerful extrusion, to make the weld strength is greatly improved,It is the idealproduct for a variety of thermoplastic welding processing.
Available welding materials: thermoplastic HDPE, PP, PVDF, especially PE .Don't apply in a conductive plastic(PEEL), or cause the machine to produce a conductive short-circuit.

Main technical parameters>>>

Model	SDJ3400
Voltage	220V
Motor Power	1300W
Air Heating Power	3400W
Welding Speed	3.0kg/4mm
Rod diameter	3.0-4.0mm
Machine Weight	12kg
Warranty	12months
Certificate	CE,ISO9001
Dellivery	2-3workdays after payment

Product Pictures